Clarion buzzing sound

Clarion buzzing sound

If your Clarion is making a buzzing or humming sound the amp is likely touching metal. You can get some moldable packing foam or zip tie something to it that is plastic so that it is not in direct contact with metal and that buzzing/humming will go away. 

    • Related Articles

    • Installing Toyota Amplifier

      Installing Toyota Amplifier Toyota Amp Install Guide The plug with the audio video wiring is optional if you are adding rear backup camera or rear seat entertainment. Otherwise you may tape this up somewhere. The two female connectors are for your ...

    • GMC Amp Power Tap

      GMC Amp Power Tap For some vehicles when upgrading to a radios that needs an amp for increased volume you'll need to tap into the thin pink wire on the amp harness (G-INTAMP). You can tap into the thin pink wire at the amp or at the radio. We ...

    • Diagram for Denso Amp and GM XM diagram kit

      Diagram for Denso Amp and GM XM diagram kit

    • Nissan Order Compatibility - Send to Customer to verify

      There are 3 pieces of information that we need answered before we can fulfill an order for a Nissan Radio, unfortunately the VIN does not provide us this information. Firstly, we need to know about the audio amplifier you currently have installed ...

    • 2016 - 2020 Toyota Tacoma Entune 3.0 Radio doesn't get any audio

      2016 - 2020 Toyota Tacoma Entune 3.0 Radio doesn't get any audio After installing this upgrade, and allowing the vehicle to sleep up to 48 hours, if there's no audio then check to see if there's a JBL logo on the vehicle's radio fascia. If so, that ...