Extra / Unused / Unnecessary Buttons on 19+ Ram Bezels
When upgrading your radio, you may have extra buttons on your new bezel for features that your vehicle is not equipped with.
This is normal.
From the factory, the trim level with that radio will always have those features.
In your case, you will have the extra buttons, but obviously they will have no function.
We always want to provide parts that are factory, or as close to factory as we can get.
Therefore, we do not, nor do we recommend, modifying any bezels to remove or replace any buttons.
Related Articles
Ram Passive Keyless Entry Upgrade – Troubleshooting Guide
? Passive Keyless Entry Upgrade – Troubleshooting Guide ⚠️ 1. Door Handle Touch Sensors Not Responding Check for Secure Connections: Confirm that all connectors are fully seated and locked into place. Inspect Door Handle Installation: Ensure that ...
AC Climate control visual bug on Ram 1500
Parts Required Two Genies labeled LD, and DS Wire connector that you will use to connect the sensor Temperature Sensor Security bypass if you are an 18+ year Installation Attach the sensor wire to the open molenex connector on the harness that is ...
RAM Wireless Charger - Power Inverter Outlets Not Working
RAM Wireless Phone Charger Listing https://infotainment.com/shop/interior-accessories/wireless-smartphone-chargers/c-bdlwrlchg-dt/ When installing the wireless charger kit, the included harness requires you to pin to connector C5/E on the BCM. The ...
Ram Cab Mounted Lighting Pin out for Uconnect Mirror replacement
Ram Cab Mounted Lighting Pin out for Uconnect Mirror replacement If you have a Cab mounted light, and are changing your rear view mirror to the Uconnect Microphone Mirror you will need to switch some pins to retain functionality of the cab lights. ...
RAM Only--The Replacement USB Hub Does Not Fit Properly
RAM Only--The Replacement USB Hub Does Not Fit Properly This is due to the fact that there is only one Apple Carplay-compatible hub for the Dodge Ram and it's designed for 2018 vehicles. Please see the hub's install video for further information: ...