Ford power running boards harness DSM

• Related Articles

• RADIO DOES NOT POWER ON AFTER I INSTALL MY UPGRADE KIT

  If you installed your upgrade kit and notice that your radio no longer turns on please check the followings:  1. If you received a C-INT-C4T (the big harness that connects to the radio and existing power harness) in your kit, make sure that the white ...

• BATTERY/BCM DRAINAGE EXPEDITION 4 to 8 Sync 3 Upgrade Kit

  Are you experiencing battery drainage or your BCM does not sleep after the vehicle is turned off? Make sure that you are running the power to an ignition source as seen on the installation video. The same plug that will run to an ignition source is ...

• Daytime Running Lights Genie (DRL)

  The Daytime Running Lights genie does not provide the option to toggle on and off from the radio. The DRL will be disabled when the vehicle is completely shut off. If you would like to remove the DRL option it requires a "Restore to Factory Default" ...

• There's no option to toggle off Daytime Running Lights after using OBD Genie

  There's no option to toggle off Daytime Running Lights after using OBD Genie In North America, any Chrysler-based vehicle that's of 2015 year or older no longer has the ability to toggle off Daytime Running Lights. This is whether the feature was ...

• GMC Amp Power Tap

  GMC Amp Power Tap For some vehicles when upgrading to a radios that needs an amp for increased volume you'll need to tap into the thin pink wire on the amp harness (G-INTAMP). You can tap into the thin pink wire at the amp or at the radio. We ...