No Audio/Audio Only In One Channel (Rear/Front)

No Audio/Audio Only In One Channel (Rear/Front)

Go to the radio settings of the radio.

Scroll to the bottom and select system information.

Select "Restore to Factory Default." Radio will reset.

If still having issues, Perform a Canbus reset. This is where you removing the battery cables (Starting with negative) and then reinstalling them (Starting Positive).

Then test to see if issue resolved. If not contact our Customer Support line or chat. 

Customer Support
Toll Free — 1-855-636-6287
(Select option 1 for Customer Support)

    • Related Articles

    • C-BEZ-VOL

      For the C-BEZ-VOL, Customer is to plug the passthrough harness to the back of the HVAC module that they install into the new C-BEZ-VOL. Installation Video: https://www.youtube.com/watch?v=HIxubC9hxt8 Here is our Volume bezel. At the bottom you can ...

    • Enzo C-INT4CK Instructions

      FCA Heated and Ventilated Seat including Heated Steering Wheel Emulator (C-INT4CK) For those who upgrade to the 8.4" radio and their heated/cooled seats & heated/cooled steering wheel in the new radio are grayed out, we have a solution. Example of ...

    • Ford rear camera stays on display after driving.

      As per Jesse, they may more than likely have the "rear camera delay" option on within the vehicle and would just need to turn that off via the steps below. Switching Rear View Camera Delay On and Off Access the vehicle drawer on the touchscreen. ...

    • JEEP Wrangler JL Rear Park Sense (Sensors are reversed)

      JEEP Wrangler JL Rear Park Sense (Sensors are reversed) If the sensors are reacting on the instrument cluster reversed... Such as an object or person on the rear-right side of the vehicle but the instrument cluster saying the object or person is on ...

    • C-INTC3T RE2 RB5 Camera Repining Guide

      C-INTC3T RE2 RB5 Camera Repining Guide If your RB5 or RE2 radio already has the C3 connector with populated wires like the photo below, you will not be able to use our connector because you will lose audio and microphone for bluetooth functions. You ...