Auto-Locking Tailgate: "Where do I plug in camera?" or "I get a blue screen/no camera available screen on radio" (IOB & IO4/5/6)
Auto-Locking Tailgate: "Where do I plug in camera?" or "I get a blue screen/no camera available screen on radio" (IOB & IO4/5/6)
If you have a locking tailgate, please follow the cable from the
existing handle to where it's plugged in.
Replace plug with cable from
new handle camera. Picture is in
IO4/5/6 vehicles.
In IOB vehicles with auto-locking tailgate, please
trace original cable (fatter cable) from tailgate and replace with our
cable.
You can see this cable in the picture above. It's above the ports, not attached to them; look carefully.
Related Articles
GM Backup Camera Auto Lock Connector
If a customer asks "What is the small, two-pin plug?" (Black and White Wires) This is for the auto tailgate locking mechanism. Customer needs to move the auto lock mechanism over from their factory tailgate handle over to the new tailgate handle from ...Android Auto Trouble Shooting
Android Auto Trouble Shooting First, make sure that the Android is both bluetooth paired, and plugged into the USB hub (Some newer systems work by being plugged in only, but most call for both Bluetooth and Hardwired for Android Auto). If Error 8 ...Denzo shows splash screen, then blue screen with clock
Denzo shows splash screen, then blue screen with clock When turning on the vehicle, if your Denzo headunit give you the GMC splash screen, then gives you a blue screen with just the clock on it, no allowing you to navigate further, try the below ...IOB Genie gave green light but screen is black
This Genie puts the radio into sleep mode while it's programming. This means, after the Genie gives a green LED light, if it's pulled out immediately, the radio screen will stay black. After turning on the vehicle's engine, letting it run 1 minute, ...IOU has blue screen and Cadillac splash after install
This is completely normal, as the screen will be blue, count down then give a Cadillac splash screen upon install install. This will not correct itself until the vehicle is restarted.