GM Cadillac HMI GPS Splitter harness connector
Follow the picture below for installation instructions below on how to connect the GM HMI GPS Splitter (SKU: G-GPSSPLT)
Product Page Inventory link: https://inventory.zoho.com/app/792403778#/inventory/items/3569490000000200004?filter_by=Status.All&per_page=25&search_criteria=%7B%22search_text%22%3A%22G-GPSSPLT%22%7D&sort_column=created_time&sort_order=A
Related Articles
GM Backup Camera Auto Lock Connector
If a customer asks "What is the small, two-pin plug?" (Black and White Wires) This is for the auto tailgate locking mechanism. Customer needs to move the auto lock mechanism over from their factory tailgate handle over to the new tailgate handle from ...Brick Kit XP2 Harness not getting secure connection for Sync
In some rare circumstances, the Sync harness when being pinned with the XP2 harness, voice recognition and Sync may not operate properly. This is mostly due to the XP2 harnesses pins not making a secure connection to the receptacle that the Sync ...IOU has blue screen and Cadillac splash after install
This is completely normal, as the screen will be blue, count down then give a Cadillac splash screen upon install install. This will not correct itself until the vehicle is restarted.Ford power running boards harness DSM
The Ford Power Running board harness is not compatible with vehicles that have DSM installed. This would include Lariat and any trim level higher than that.Display not showing but rear camera does in a GM vehicle
This is caused by a faulty ACM, and the ACM will need to be replaced. It doesn't matter if the HMI is a 2.0 or 2.5, it would still work. This is illustrated when the vehicle is put in reverse and shows a picture, meaning HMI & screen are ok. The ACM ...