CAN Bus Reset Procedure

CAN Bus Reset Procedure

CAN Bus Reset Procedure

  1. Disconnect the Battery:

    • Remove the negative cable from the vehicle’s battery.

    • If the vehicle has two batteries, disconnect the negative cables from both.

  2. Wait:

    • Leave the negative cable(s) disconnected for approximately 15 to 20 minutes to allow the system to fully discharge.

  3. Reconnect:

    • After the wait period, securely reconnect the negative cable(s) to the battery.


    • Related Articles

    • Uconnect 5 UBD Retrofit – Connection & Troubleshooting Guide

      ? Uconnect 5 UBD Retrofit – Connection & Troubleshooting Guide ?️ 1. Port Overview (Color-Coded) Connector Color Function Action/Notes Blue GPS Antenna Connect to GPS Fakra via conversion harness (C-INTC5T). White AM/FM Antenna Plug directly onto ...

    • Uconnect 5 UBQ 12" & UBL 8.4" Upgrade – Connection & Troubleshooting Guide

      Uconnect 5 UBQ 12" & UBL 8.4" Upgrade – Connection & Troubleshooting Guide ?️ 1. Port Overview (Color-Coded) Connector Color Function Action/Notes Blue GPS Antenna Connect using Fakra conversion adapter from the C-INTC5T harness. White AM/FM Antenna ...

    • Ram Passive Keyless Entry Upgrade – Troubleshooting Guide

      ? Passive Keyless Entry Upgrade – Troubleshooting Guide ⚠️ 1. Door Handle Touch Sensors Not Responding Check for Secure Connections: Confirm that all connectors are fully seated and locked into place. Inspect Door Handle Installation: Ensure that ...

    • Uconnect 4 UAQ/UAS – Connection & Troubleshooting Guide

      Uconnect 4 UAQ/UAS – Connection & Troubleshooting Guide ? 1. Parts List (*Included only when bezel is ordered) UAQ Radio USB Hub *USB Hub Harness *8.4" OEM Bezel *HVAC Module *Resistor *Resistor Harness *Bezel Harness ? 2. Rear Connector Overview ...

    • UAX Troubleshooting guide

      ? UAX Radio Troubleshooting Guide For Infotainment.com Upgrade Kit Users This guide will help you quickly diagnose and resolve issues related to your upgraded UAX infotainment system. It includes hardware port references, how to access diagnostic ...